| Customization: | Available |
|---|---|
| Application: | Aviation, Electronics, Industrial, Medical, Chemical, Aerospace, Machining, Metallurgy, Oil Drilling, Mi |
| Standard: | JIS, GB, DIN, BS, ASTM, AISI, API ISO Standard |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Tugsten carbide strips
Application.
Compared with steel strips, tungsten carbide strips are much more wear resistant and temperature resistant. They're widely use in many field such as woodworking, machining of refractory alloys, stainless steel, high manganese steel, for processing cast iron, non-ferrous metal and aluminum section bar, etc.
Advantages.
--2 times wear resistance than steel
--ground tolerance or blank
--TCT strips and OEM
--100% Virgin pure Raw materials
--Flexible payment terms (L/C,T/T, western union, etc)
--Certificate of origin available
--7days 24 hours after-sale service
Grades recommend.
| Grade/ Properties / Application | ||||||||
| Grade | Equal to ISO Category Number | Performance | Performance&application recommended | |||||
| Density | Bend Strength | Hardness | ||||||
| G/Cm 3 | N/mm 2 | HRA | ||||||
| YG3 | K01 | 14.9-15.3 | ≥1180 | ≥90.5 | Sand-blasting nozzles qualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting n | |||
| YG3X | K01 | 15.1-15.4 | ≥1300 | ≥91.5 | ||||
| YG8C | 14.8 | 2400 | 88.5 | and as the inserts of rotary prospecting bits to cut soft and | ||||
| medium hard formations. | ||||||||
| YG6 | 14.95 | 1900 | 90.5 | For coring crowns,electric coal drill bits, coal cutting picks,oil | ||||
| cone bits and scraping knife bits,used in coal geological prospecting, | ||||||||
| mining and oil well boring. | ||||||||
| YG6X | K10 | 14.8-15.1 | ≥1560 | ≥91.0 | Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron. | |||
| YG6A | K10 | 14.7-15.1 | ≥1580 | ≥91.0 | ||||
| YG6 | K20 | 14.7-15.1 | ≥1670 | ≥89.5 | Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc. | |||
| YG8 | K30 | 14.6-14.9 | ≥1840 | ≥89 | Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts. | |||
| YG10X | 14.5 | 2400 | 91.5 | Fine grain alloy, good wear resistance,Used for processing hard | ||||
| wood, veneer board,PCB,PVC and metals. | ||||||||
| YG11 | 14.4 | 2600 | 88.5 | Forming or stamping dies for metal powders and nonmental powders. | ||||
| YG11C | K40 | 14.4 | 2700 | 86.5 | Largely for the inserts and buttons of percussion bits and tricone bits to cut medium | |||
| hard, hard and very hard formations. | ||||||||
| YG15 | K40 | 14 | 2800 | 87.5 | For fabricating drawing dies of steel tubesand rods under high | |||
| compressibility ratio;punching,stamping,forging tools under large stress. | ||||||||
| YG15C | 14 | 3000 | 85.5 | For oil cone dril bits, for medium soft and medium-hard rocks. | ||||
| YG20 | 13.5 | 3200 | 85.5 | For fabricating of stamping dies for watch parts, spring plates of musical | ||||
| instruments, battery jars,small sized steel balls,screws,screw caps. | ||||||||
| YG20C | 13.5 | 3300 | 83.5 | Dies for wear resistant or impact resistant application. | ||||
| YG25C | 13.1 | 3600 | 82.5 | Stainless bolt header dies and rollers. | ||||
){kind=link}