Tungsten Plasma Injection Electrodes

Product Description

Cylindrical rod type copper tungsten (shank type). Copper alloy of 30% copper and 70% tungsten. It is featured by high processing speed and low consumption for roughing and intermediate processing of carbide alloy.

Plasma Spray Coating

Plasma spray coating is the most flexible process out of all the thermal spray processes. Basically, it is the spraying of molten or heat-softened material onto a surface to provide a coating. The utilization of the powerful plasma spray coating technology can facilitate the spraying of almost any ceramic, cermet or metal onto a wide variety of materials with exceptional bond strength as well as a minimal distortion of the substrate.

 

Advantages of Plasma Spray Coating produced by our company

Realize seamless combination of tungsten and copper. Compared with traditional brazing, the bonding strength between tungsten and copper is high, and the contact area, resistance and heat dissipation are more uniform, which greatly improves the product performance. Therefore, our Thermal spraying electrode has a good service life.

Weilai new materials use high-performance tungsten electrodes to ensure good arcing performance and ablation resistance, and provide a variety of rare earth doped tungsten electrodes for selection!

Resistance to wear, corrosion, abrasion, heat, oxidization and electricity

Rich experience in customized processing.
 

We can accept customer samples or drawings for production.

Resistance welding of non-ferrous metals
The resistance welding of non-ferrous metals, due to their goodthermal conductivity and low electrical resistance, places special demands on the electrodes.These features require the use of very high welding currents, so that electrodes made of copperalloys, which do not have adequate hardness and resistance athigh temperatures, wear out quickly or are completely unusable.

Resistance welding electrodes for non-ferrous metals
For resistance welding of non-ferrous metals electrodes are madeof tungsten (W), molybdenum (Mo) or other refractory alloys due tomuch better properties during work in high temperatures.Compositeelectrodes, where the shank supplies electricity and dissipates thegenerated heat, and the electrode tip made of W or Mo takes partin the welding process, is a very good choice for most applications.

The advantages of refractory metals electrodes:
*Stable hardness at high temperatures
*Low thermal conductivity
*Low adhesion
*Low chemical reactivity with other materials

The above-mentioned advantages significantly contribute to thestabilization of the welding process, and hence to the improvementof production efficiency and the extension of the life of a singleelectrode.

The use of tungsten and molybdenum electrodes:
The electrodes are mainly used for welding electrical parts used in the production of cars. Other industries using this type of electrodes include: electronics and household appliances.

Materials properties
Tungsten (W)
*Composed in more than 99.9% pure tungsten
*The highest melting point among metals (3387°C).
*Very high hardness at both in room and high temperatures
*Sensitive to mechanical and thermal shock and cracking
*Low reactivity with other metal components.
*High electrical resistance.

Molybdenum (Mo)
*Composed in more than 99.9% pure molybdenum
*One of the highest melting point among metals (2623°C)
*More resistant to mechanical and thermal shock than W
*Less hardness in room and high temperatures compared to W
*Low reactivity with other metal components.
*Electrical and thermal properties comparable to tungsten.

Copper-tungsten alloy (Cu25W75).
*Alloy made of copper and tungsten.
*Characterized by moderate properties between copper alloysand tungsten.
*Moderate hardness at high temperature.
*Better electrical conductivity than tungsten and molybdenum.

Silver-tungsten alloy (Ag35W65).
*Alloy made of silver and tungsten.
*Like the CuW alloy,AgW is characterized by moderate
*hardness at high temperatures and electrical conductivity
*Usually, it consists of 35%Ag and 65% with W.
*Used for welding stainless steel and / or nickel foils.

Image: